Water Line 6" 300lb RF A105 B16.5 Forged Carbon Socket Weld Pipe Flange

• Standard: ANSI, DIN, GB, JIS, GOST, BSW
• Type: Welding Flange
• Material: Carbon Steel
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 1/2" to 72"
• Structure: Round
• Connection: Flanged
• Sealing Surface: RF
• Manufacturing Way: Forging
• Transport Package: in Wooden Cases or in Pallet
• Specification: 1/2-72 inch
• Trademark: Shengtian
• Origin: China
• HS Code: 730793
• Production Capacity: 2000000

Product Description

Water Line 6" 300lb RF A105 B16.5 Forged Carbon Socket Weld Pipe Flange

Product Description

 1) Sizes: From DN10 to DN3000
2) Material: A105
3) Standard: ASTM, DIN, GBA, ISO, JIS and customers' drawings for special use
4) Types: WN, SO, BL, Plate, Thread, Socket and etc
5) Process: Free forging, plate cutting
6) Packing: In wooden cases, wooden pallets or as per customers' special requirement, Standard Export Package

Type	slip on flange, Weld Neck Flange Threaded Flange Blind Flange,  Orifice Flange socket weld flange, Spacer Ring, Paddle, Spectacle Blind Flange
Material	stainless steel :A 182 F 304/304L/316/316L/321/347, Duplex F51/F53/F44/F55/F60/F61  Alloy steel :STM A694/ A694M F42/F46/F52/F56/F60/F70,A182  F5,F9,F11,F22             Carbon steel:ASTM A 105, ST37.2   A 350 LF1, LF2, LF3,API 6A AISI 4130
Standard	ASTM/ASME/ANSIB16.5, B16.47, ASME/ANSIB16.48, JIS/KS (5K, 10K, 16K, 20K), DIN2633, DIN2634, DIN2635,EN1092,BS4504,AWWA C206,API 6A ,Customized drawings welcomed
Size	1/2" - 120 " (DN15-DN3000)
Pressure	Class150-Class2500 JIS 5k-30k DIN 6bar-40bar
Face type	FF,RF,RTJ
Surface Treatment	Surface galvanized, antirust coating, Epoxy & FBE Coating,protected with plastic caps
Packing	Pallet/Wooden case(Fumigation free)
Certificate	ISO9001,PED,EN10204 3.1 MTC
Quality control	In house and third party

Standard:
(1) ANSI B16.5, A105 150LB / 300LB / 600LB / 900LB / 1500LB / 2500LB
(2) DIN 2573 PN6 / DIN 2576 PN10 / DIN2502 PN16 / DIN2503 P25-40 / DIN2566 PN16 / DIN2631-2635 RST37.2 OR C22.8
(3) JIS SS400 OR SF440 5K / 10K / 16K / 20K / 30K
(4) UNI 2276 / 2277 / 2278 / 6084 / 6089 / 6090 / 2544 / 2282 / 6091-6093
(5) EN1092 PN6 / PN10 / PN16 / PN25 / PN40 / TYPE1 TYPE2 TYPE 5 TYPE 12 TYPE 13
(6) BS4504 SANI1123 1000/3, 1600/3, 2500/3, T/D, T/E, T/F carbon steel flange
(7) AS2129 TABLE D / TABLE H / TABLE E carbon steel flange
(8) GOST 12820-80 / 12821-80 carbon steel flange

Packaging & Shipping

 

Company Profile

A 16MnR Socket flanges  is very similar in appearance to a Slip-On flange, but the main difference is the socket flange is bored out match a specific pipe inside-diameter. The back side of this center opening is then counter bored to form the appropriate size socket to take the pipe outside diameter.

The diameter of the smaller bore is the same as the inner diameter of the matching pipe. A restriction is built into the bottom of the bore, which sets as a shoulder for the pipe to rest on. This eliminates any restriction in flow when using a socket flange. Socket flanges are primarily used to make flanged joints where required in small sizes in socket specs.

HeBei ShengTian Pipe-fitting Group Co.,Ltd. is a leading manufacturer and supplier of blind flanges,weld neck

 

Established in 1989, Hebei Shengtian Pipe-Fitting Group Co., Ltd. located in Mengcun County Hebei Province China, covering a land area of 100,000 square meters, with a workshop of 25,000 square meters and registered capital of 110 million RMB. Our company has a strong staff team. There are over 360 employees, including over 30 professionals and technicians.
 

 

Certifications

 

 

Our Advantages

 

1. Dimension measurements, all within standard tolerance.
2. Thickness tolerance:+/-12.5% , or on your request
3. PMI
4. MT, UT,X-ray test
5. Accept Third party inspection
6. Supply MTC, EN10204 3.1/3.2 certificate

FAQ

 

Q: Can you supply Form e, Certificate of origin? 

A: Yes, we can supply. 

Q: Can you supply invoice and CO with chamber of commerce? 

A: Yes, we can supply. 

Q: Can you accept L/C deferred 30, 60, 90days? 

A: We can. 

Q: Can you accept O/A payment? 

A: We can. 

Q: Can you supply samples? 

A: Yes, some samples are free.

Q: Can you supply the products which comply with NACE? 

A: Yes, we can.